diff --git a/ports/espressif/boards/lolin_s3_mini_pro/board.c b/ports/espressif/boards/lolin_s3_mini_pro/board.c
new file mode 100644
index 0000000000000..cd5a083dbdba1
--- /dev/null
+++ b/ports/espressif/boards/lolin_s3_mini_pro/board.c
@@ -0,0 +1,84 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/fourwire/FourWire.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/board/__init__.h"
+
+
+#define DELAY 0x80
+
+// display init sequence according to ST7789
+uint8_t display_init_sequence[] = {
+    0x01, 0 | DELAY, 0x96, // _SWRESET and Delay 150ms
+    0x11, 0 | DELAY, 0xff, // _SLPOUT and Delay 500ms
+    0x3A, 1 | DELAY,  0x55, 0x0a, // _COLMOD and Delay 10ms
+    0x36, 0x01, 0x08, // _MADCTL
+    0x21, 0x80, 0x0A, // _INVON Hack and Delay 10ms
+    0x13, 0x80, 0x0A, // _NORON and Delay 10ms
+    0x29, 0 | DELAY, 0xff // _DISPON and Delay 500ms
+};
+
+
+void board_init(void) {
+    fourwire_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
+    // busio_spi_obj_t *spi = common_hal_board_create_spi(0);
+    busio_spi_obj_t *spi = &bus->inline_bus;
+    common_hal_busio_spi_construct(spi, &pin_GPIO40, &pin_GPIO38, NULL, false);
+    common_hal_busio_spi_never_reset(spi);
+    bus->base.type = &fourwire_fourwire_type;
+
+    common_hal_fourwire_fourwire_construct(
+        bus,
+        spi,
+        &pin_GPIO36,    // DC
+        &pin_GPIO35,    // CS
+        &pin_GPIO34,    // RST
+        40000000,       // baudrate
+        0,              // polarity
+        0               // phase
+        );
+    busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
+    display->base.type = &busdisplay_busdisplay_type;
+
+    common_hal_busdisplay_busdisplay_construct(
+        display,
+        bus,
+        128,            // width (after rotation)
+        128,            // height (after rotation)
+        2,             // column start
+        1,             // row start
+        0,              // rotation
+        16,             // color depth
+        false,          // grayscale
+        false,          // pixels in a byte share a row. Only valid for depths < 8
+        1,              // bytes per cell. Only valid for depths < 8
+        false,          // reverse_pixels_in_byte. Only valid for depths < 8
+        true,           // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS,   // set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO33,    // backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f,           // brightness
+        false,          // single_byte_bounds
+        false,          // data_as_commands
+        true,           // auto_refresh
+        60,             // native_frames_per_second
+        true,           // backlight_on_high
+        false,          // SH1107_addressing
+        200           // backlight pwm frequency
+        );
+}
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.h b/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.h
new file mode 100644
index 0000000000000..2fe5f4205dac0
--- /dev/null
+++ b/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.h
@@ -0,0 +1,24 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2023 David Sullivan
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "LOLIN S3 MINI PRO 4MB Flash 2MB PSRAM"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO8)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO11)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO12)
+
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO38)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO39)
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO40)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
diff --git a/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.mk b/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.mk
new file mode 100644
index 0000000000000..26d7e176a351e
--- /dev/null
+++ b/ports/espressif/boards/lolin_s3_mini_pro/mpconfigboard.mk
@@ -0,0 +1,22 @@
+USB_VID = 0x303a
+USB_PID = 0x8217
+USB_PRODUCT = "LOLIN S3 MINI PRO 4MB Flash 2MB PSRAM"
+USB_MANUFACTURER = "WEMOS"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+
+CIRCUITPY_ESP_PSRAM_SIZE = 2MB
+CIRCUITPY_ESP_PSRAM_MODE = qio
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_BITMAPFILTER = 0
+CIRCUITPY_CODEOP = 0
+CIRCUITPY_PARALLELDISPLAYBUS = 0
+
+# Include these Python libraries in firmware.
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
diff --git a/ports/espressif/boards/lolin_s3_mini_pro/pins.c b/ports/espressif/boards/lolin_s3_mini_pro/pins.c
new file mode 100644
index 0000000000000..595cdd489004c
--- /dev/null
+++ b/ports/espressif/boards/lolin_s3_mini_pro/pins.c
@@ -0,0 +1,68 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2023 David Sullivan
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // User buttons
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON1), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON2), MP_ROM_PTR(&pin_GPIO48) },
+
+    // LEDs
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_ENABLE), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IR_LED), MP_ROM_PTR(&pin_GPIO9) },
+
+    // I2C
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO12) },
+
+    // IMU QMI8658C
+    { MP_ROM_QSTR(MP_QSTR_IMU_INT1), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IMU_INT2), MP_ROM_PTR(&pin_GPIO21) },
+
+    // TFT Display
+    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_RES), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO33) },
+
+    // SPI
+    { MP_ROM_QSTR(MP_QSTR_CLK), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO38) },
+
+    // User accessible GPIO
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+
+    // UART
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+
+    // Objects
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
+
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/lolin_s3_mini_pro/sdkconfig b/ports/espressif/boards/lolin_s3_mini_pro/sdkconfig
new file mode 100644
index 0000000000000..e962866216039
--- /dev/null
+++ b/ports/espressif/boards/lolin_s3_mini_pro/sdkconfig
@@ -0,0 +1,14 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration