Fix CI #31

ojeda · 2020-11-27T20:16:44Z

With the change that Finn has.

Signed-off-by: Miguel Ojeda ojeda@kernel.org

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

A fstrim on a degraded raid1 can trigger the following null pointer dereference: BTRFS info (device loop0): allowing degraded mounts BTRFS info (device loop0): disk space caching is enabled BTRFS info (device loop0): has skinny extents BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS info (device loop0): enabling ssd optimizations BUG: kernel NULL pointer dereference, address: 0000000000000620 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs] RSP: 0018:ffff959541797d28 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608 RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0 RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000 R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8 FS: 00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0 Call Trace: btrfs_ioctl_fitrim+0x167/0x260 [btrfs] btrfs_ioctl+0x1c00/0x2fe0 [btrfs] ? selinux_file_ioctl+0x140/0x240 ? syscall_trace_enter.constprop.0+0x188/0x240 ? __x64_sys_ioctl+0x83/0xb0 __x64_sys_ioctl+0x83/0xb0 Reproducer: $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1 $ mount /dev/loop0 /btrfs $ umount /btrfs $ btrfs dev scan --forget $ mount -o degraded /dev/loop0 /btrfs $ fstrim /btrfs The reason is we call btrfs_trim_free_extents() for the missing device, which uses device->bdev (NULL for missing device) to find if the device supports discard. Fix is to check if the device is missing before calling btrfs_trim_free_extents(). CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The `proc-macro2` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `syn` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `proc-macro2` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `syn` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `proc-macro2` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The `syn` crate depends on the `unicode-ident` crate to determine whether characters have the XID_Start or XID_Continue properties according to Unicode Standard Annex Rust-for-Linux#31. However, we only need ASCII identifiers in the kernel, thus we can simplify the check and remove completely that dependency. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 7abd955 ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use 32-bit subranges to prune some 64-bit BPF_JEQ/BPF_JNE conditions that otherwise would be "inconclusive" (i.e., is_branch_taken() would return -1). This can happen, for example, when registers are initialized as 64-bit u64/s64, then compared for inequality as 32-bit subregisters, and then followed by 64-bit equality/inequality check. That 32-bit inequality can establish some pattern for lower 32 bits of a register (e.g., s< 0 condition determines whether the bit #31 is zero or not), while overall 64-bit value could be anything (according to a value range representation). This is not a fancy quirky special case, but actually a handling that's necessary to prevent correctness issue with BPF verifier's range tracking: set_range_min_max() assumes that register ranges are non-overlapping, and if that condition is not guaranteed by is_branch_taken() we can end up with invalid ranges, where min > max. [0] https://lore.kernel.org/bpf/CACkBjsY2q1_fUohD7hRmKGqv1MV=eP2f6XK8kjkYNw7BaiF8iQ@mail.gmail.com/ Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231112010609.848406-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: Bjoern Doebel <doebel@amazon.de> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>