[BUG] Sources list on ubuntu focal #1

emidev98 · 2022-03-26T08:42:33Z

Dear Tuxedo Team,

I have found that after installing Ubuntu 20.04 on Polaris 15 (v3) the repository for security was miss configured on my sources.list as:

deb https://mirrors.tuxedocomputers.com/ubuntu/mirror/archive.ubuntu.com/ubuntu focal-security main restricted universe multiverse

After searching on your repos I could find that the right URL is:

deb https://mirrors.tuxedocomputers.com/ubuntu/mirror/security.ubuntu.com/ubuntu focal-security main restricted universe multiverse

Maybe I am mistaking, but let me know if this is the correct way.

The text was updated successfully, but these errors were encountered:

BugLink: https://bugs.launchpad.net/bugs/1929035 A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. Fixes: 5f08318 ("smc: connection data control (CDC)") Reported-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 349d431) [picked again from upstream after having to revert due to LP: 1929035] Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1966056 commit 8f43470 upstream. Commit 54659ca ("staging: rtl8723bs: remove possible deadlock when disconnect (v2)") split the locking of pxmitpriv->lock vs sleep_q/lock into 2 locks in attempt to fix a lockdep reported issue with the locking order of the sta_hash_lock vs pxmitpriv->lock. But in the end this turned out to not fully solve the sta_hash_lock issue so commit a7ac783 ("staging: rtl8723bs: remove a second possible deadlock") was added to fix this in another way. The original fix was kept as it was still seen as a good thing to have, but now it turns out that it creates a deadlock in access-point mode: [Feb20 23:47] ====================================================== [ +0.074085] WARNING: possible circular locking dependency detected [ +0.074077] 5.16.0-1-amd64 #1 Tainted: G C E [ +0.064710] ------------------------------------------------------ [ +0.074075] ksoftirqd/3/29 is trying to acquire lock: [ +0.060542] ffffb8b30062ab00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_xmit_classifier+0x8a/0x140 [r8723bs] [ +0.114921] but task is already holding lock: [ +0.069908] ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs] [ +0.116976] which lock already depends on the new lock. [ +0.098037] the existing dependency chain (in reverse order) is: [ +0.089704] -> #1 (&psta->sleep_q.lock){+.-.}-{2:2}: [ +0.077232] _raw_spin_lock_bh+0x34/0x40 [ +0.053261] xmitframe_enqueue_for_sleeping_sta+0xc1/0x2f0 [r8723bs] [ +0.082572] rtw_xmit+0x58b/0x940 [r8723bs] [ +0.056528] _rtw_xmit_entry+0xba/0x350 [r8723bs] [ +0.062755] dev_hard_start_xmit+0xf1/0x320 [ +0.056381] sch_direct_xmit+0x9e/0x360 [ +0.052212] __dev_queue_xmit+0xce4/0x1080 [ +0.055334] ip6_finish_output2+0x18f/0x6e0 [ +0.056378] ndisc_send_skb+0x2c8/0x870 [ +0.052209] ndisc_send_ns+0xd3/0x210 [ +0.050130] addrconf_dad_work+0x3df/0x5a0 [ +0.055338] process_one_work+0x274/0x5a0 [ +0.054296] worker_thread+0x52/0x3b0 [ +0.050124] kthread+0x16c/0x1a0 [ +0.044925] ret_from_fork+0x1f/0x30 [ +0.049092] -> #0 (&pxmitpriv->lock){+.-.}-{2:2}: [ +0.074101] __lock_acquire+0x10f5/0x1d80 [ +0.054298] lock_acquire+0xd7/0x300 [ +0.049088] _raw_spin_lock_bh+0x34/0x40 [ +0.053248] rtw_xmit_classifier+0x8a/0x140 [r8723bs] [ +0.066949] rtw_xmitframe_enqueue+0xa/0x20 [r8723bs] [ +0.066946] rtl8723bs_hal_xmitframe_enqueue+0x14/0x50 [r8723bs] [ +0.078386] wakeup_sta_to_xmit+0xa6/0x300 [r8723bs] [ +0.065903] rtw_recv_entry+0xe36/0x1160 [r8723bs] [ +0.063809] rtl8723bs_recv_tasklet+0x349/0x6c0 [r8723bs] [ +0.071093] tasklet_action_common.constprop.0+0xe5/0x110 [ +0.070966] __do_softirq+0x16f/0x50a [ +0.050134] __irq_exit_rcu+0xeb/0x140 [ +0.051172] irq_exit_rcu+0xa/0x20 [ +0.047006] common_interrupt+0xb8/0xd0 [ +0.052214] asm_common_interrupt+0x1e/0x40 [ +0.056381] finish_task_switch.isra.0+0x100/0x3a0 [ +0.063670] __schedule+0x3ad/0xd20 [ +0.048047] schedule+0x4e/0xc0 [ +0.043880] smpboot_thread_fn+0xc4/0x220 [ +0.054298] kthread+0x16c/0x1a0 [ +0.044922] ret_from_fork+0x1f/0x30 [ +0.049088] other info that might help us debug this: [ +0.095950] Possible unsafe locking scenario: [ +0.070952] CPU0 CPU1 [ +0.054282] ---- ---- [ +0.054285] lock(&psta->sleep_q.lock); [ +0.047004] lock(&pxmitpriv->lock); [ +0.074082] lock(&psta->sleep_q.lock); [ +0.077209] lock(&pxmitpriv->lock); [ +0.043873] *** DEADLOCK *** [ +0.070950] 1 lock held by ksoftirqd/3/29: [ +0.049082] #0: ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs] Analysis shows that in hindsight the splitting of the lock was not a good idea, so revert this to fix the access-point mode deadlock. Note this is a straight-forward revert done with git revert, the commented out "/* spin_lock_bh(&psta_bmc->sleep_q.lock); */" lines were part of the code before the reverted changes. Fixes: 54659ca ("staging: rtl8723bs: remove possible deadlock when disconnect (v2)") Cc: stable <stable@vger.kernel.org> Cc: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215542 Link: https://lore.kernel.org/r/20220302101637.26542-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 commit a674e48 upstream. Currently three dma atomic pools are initialized as long as the relevant kernel codes are built in. While in kdump kernel of x86_64, this is not right when trying to create atomic_pool_dma, because there's no managed pages in DMA zone. In the case, DMA zone only has low 1M memory presented and locked down by memblock allocator. So no pages are added into buddy of DMA zone. Please check commit f1d4d47 ("x86/setup: Always reserve the first 1M of RAM"). Then in kdump kernel of x86_64, it always prints below failure message: DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1 Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018 Call Trace: dump_stack+0x7f/0xa1 warn_alloc.cold+0x72/0xd6 __alloc_pages_slowpath.constprop.0+0xf29/0xf50 __alloc_pages+0x24d/0x2c0 alloc_page_interleave+0x13/0xb0 atomic_pool_expand+0x118/0x210 __dma_atomic_pool_init+0x45/0x93 dma_atomic_pool_init+0xdb/0x176 do_one_initcall+0x67/0x320 kernel_init_freeable+0x290/0x2dc kernel_init+0xa/0x111 ret_from_fork+0x22/0x30 Mem-Info: ...... DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Here, let's check if DMA zone has managed pages, then create atomic_pool_dma if yes. Otherwise just skip it. Link: https://lkml.kernel.org/r/20211223094435.248523-3-bhe@redhat.com Fixes: 6f599d8 ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified") Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: David Rientjes <rientjes@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit c9c5608 ] status.band is used in determination of status.rate -- for 5GHz on legacy rates there is a linear shift between the BD descriptor's rate field and the wcn36xx driver's rate table (wcn_5ghz_rates). We have a special clause to populate status.band for hardware scan offload frames. However, this block occurs after status.rate is already populated. Correctly handle this dependency by moving the band block before the rate block. This patch addresses kernel warnings & missing scan results for 5GHz APs that send their beacons/probe responses at the higher four legacy rates (24-54 Mbps), when using hardware scan offload: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8 Modules linked in: wcn36xx [...] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.107-g73909fa #1 Hardware name: Square, Inc. T2 (all variants) (DT) Call trace: dump_backtrace+0x0/0x148 show_stack+0x14/0x1c dump_stack+0xb8/0xf0 __warn+0x2ac/0x2d8 warn_slowpath_null+0x44/0x54 ieee80211_rx_napi+0x744/0x8d8 ieee80211_tasklet_handler+0xa4/0xe0 tasklet_action_common+0xe0/0x118 tasklet_action+0x20/0x28 __do_softirq+0x108/0x1ec irq_exit+0xd4/0xd8 __handle_domain_irq+0x84/0xbc gic_handle_irq+0x4c/0xb8 el1_irq+0xe8/0x190 lpm_cpuidle_enter+0x220/0x260 cpuidle_enter_state+0x114/0x1c0 cpuidle_enter+0x34/0x48 do_idle+0x150/0x268 cpu_startup_entry+0x20/0x24 rest_init+0xd4/0xe0 start_kernel+0x398/0x430 ---[ end trace ae28cb759352b403 ]--- Fixes: 8a27ca3 ("wcn36xx: Correct band/freq reporting on RX") Signed-off-by: Benjamin Li <benl@squareup.com> Tested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211104010548.1107405-2-benl@squareup.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit baaf965 ] The following KASAN BUG is observed when testing the rpc-if driver on rcar-gen3: root@rcar-gen3:~# modprobe -r rpc-if [ 101.930146] ================================================================== [ 101.937408] BUG: KASAN: slab-out-of-bounds in __lock_acquire+0x518/0x25d0 [ 101.944240] Read of size 8 at addr ffff0004c5be2750 by task modprobe/664 [ 101.950959] [ 101.952466] CPU: 2 PID: 664 Comm: modprobe Not tainted 5.14.0-rc1-00342-g1a1464d7aa31 #1 [ 101.960578] Hardware name: Renesas H3ULCB board based on r8a77951 (DT) [ 101.967120] Call trace: [ 101.969580] dump_backtrace+0x0/0x2c0 [ 101.973275] show_stack+0x1c/0x30 [ 101.976616] dump_stack_lvl+0x9c/0xd8 [ 101.980301] print_address_description.constprop.0+0x74/0x2b8 [ 101.986071] kasan_report+0x1f4/0x26c [ 101.989757] __asan_load8+0x98/0xd4 [ 101.993266] __lock_acquire+0x518/0x25d0 [ 101.997215] lock_acquire.part.0+0x18c/0x360 [ 102.001506] lock_acquire+0x74/0x90 [ 102.005013] _raw_spin_lock_irq+0x98/0x130 [ 102.009131] __pm_runtime_disable+0x30/0x210 [ 102.013427] rpcif_hb_remove+0x5c/0x70 [rpc_if] [ 102.018001] platform_remove+0x40/0x80 [ 102.021771] __device_release_driver+0x234/0x350 [ 102.026412] driver_detach+0x158/0x20c [ 102.030179] bus_remove_driver+0xa0/0x140 [ 102.034212] driver_unregister+0x48/0x80 [ 102.038153] platform_driver_unregister+0x18/0x24 [ 102.042879] rpcif_platform_driver_exit+0x1c/0x34 [rpc_if] [ 102.048400] __arm64_sys_delete_module+0x210/0x310 [ 102.053212] invoke_syscall+0x60/0x190 [ 102.056986] el0_svc_common+0x12c/0x144 [ 102.060844] do_el0_svc+0x88/0xac [ 102.064181] el0_svc+0x24/0x3c [ 102.067257] el0t_64_sync_handler+0x1a8/0x1b0 [ 102.071634] el0t_64_sync+0x198/0x19c [ 102.075315] [ 102.076815] Allocated by task 628: [ 102.080781] [ 102.082280] Last potentially related work creation: [ 102.087524] [ 102.089022] The buggy address belongs to the object at ffff0004c5be2000 [ 102.089022] which belongs to the cache kmalloc-2k of size 2048 [ 102.101555] The buggy address is located 1872 bytes inside of [ 102.101555] 2048-byte region [ffff0004c5be2000, ffff0004c5be2800) [ 102.113486] The buggy address belongs to the page: [ 102.118409] [ 102.119908] Memory state around the buggy address: [ 102.124711] ffff0004c5be2600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.131947] ffff0004c5be2680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.139181] >ffff0004c5be2700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.146412] ^ [ 102.152257] ffff0004c5be2780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.159491] ffff0004c5be2800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 102.166723] ================================================================== The above bug is caused by use of the wrong pointer in the rpcif_disable_rpm() call. Fix the bug by using the correct pointer. Fixes: 5de15b6 ("mtd: hyperbus: add Renesas RPC-IF driver") Signed-off-by: George G. Davis <davis.george@siemens.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20210716204935.25859-1-george_davis@mentor.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 9f89c88 ] The func v4l2_m2m_ctx_release waits for currently running jobs to finish and then stop streaming both queues and frees the buffers. All this should be done before the call to mtk_vcodec_enc_release which frees the encoder handler. This fixes null-pointer dereference bug: [ 638.028076] Mem abort info: [ 638.030932] ESR = 0x96000004 [ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits [ 638.039293] SET = 0, FnV = 0 [ 638.042338] EA = 0, S1PTW = 0 [ 638.045474] FSC = 0x04: level 0 translation fault [ 638.050349] Data abort info: [ 638.053224] ISV = 0, ISS = 0x00000004 [ 638.057055] CM = 0, WnR = 0 [ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000 [ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000 [ 638.073277] Internal error: Oops: 96000004 [#1] SMP [ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6 [ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109 [ 638.127357] Hardware name: Google Elm (DT) [ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc] [ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc] [ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc] [ 638.156060] sp : ffff8000124d3c40 [ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000 [ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58 [ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001 [ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001 [ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000 [ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d [ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20 [ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0 [ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60 [ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8 [ 638.230648] Call trace: [ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc] [ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc] [ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc] [ 638.248918] process_one_work+0x1f8/0x498 [ 638.252923] worker_thread+0x140/0x538 [ 638.256664] kthread+0x148/0x158 [ 638.259884] ret_from_fork+0x10/0x20 [ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277) [ 638.269538] ---[ end trace e374fc10f8e181f5 ]--- [gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0 Fixes: 4e855a6 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 273703e ] Commit 3158237 ("ath11k: Change number of TCL rings to one for QCA6390") avoids initializing the other entries of dp->tx_ring cause the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally this is OK because we will only get interrupts from the first TX ring on these chips and thus only the first entry of dp->tx_ring is involved. In case of one MSI vector, all DP rings share the same IRQ. For each interrupt, all rings have to be checked, which means the other entries of dp->tx_ring are involved. However since they are not initialized, system crashes. Fix this issue by simply removing those ring masks. crash stack: [ 102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 102.907447] #PF: supervisor read access in kernel mode [ 102.907451] #PF: error_code(0x0000) - not-present page [ 102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0 [ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20 [ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020 [ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k] [ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41 [ 102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202 [ 102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020 [ 102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938 [ 102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000 [ 102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938 [ 102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978 [ 102.907518] FS: 00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000 [ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0 [ 102.907527] Call Trace: [ 102.907531] <IRQ> [ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k] [ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci] [ 102.907562] __napi_poll+0x2c/0x160 [ 102.907570] net_rx_action+0x251/0x310 [ 102.907576] __do_softirq+0x107/0x2fc [ 102.907585] irq_exit_rcu+0x74/0x90 [ 102.907593] common_interrupt+0x83/0xa0 [ 102.907600] </IRQ> [ 102.907601] asm_common_interrupt+0x1e/0x40 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211026011605.58615-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…tion BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 11632d4 ] In the configuration used by the b850v3, the STDP2690 is used to read EDID data whilst it's the STDP4028 which can detect when monitors are connected. This can result in problems at boot with monitors connected when the STDP4028 is probed first, a monitor is detected and an attempt is made to read the EDID data before the STDP2690 has probed: [ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018 [ 3.803845] pgd = (ptrval) [ 3.806581] [00000018] *pgd=00000000 [ 3.810180] Internal error: Oops: 5 [#1] SMP ARM [ 3.814813] Modules linked in: [ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1 [ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.830705] Workqueue: events_unbound deferred_probe_work_func [ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c [ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c [ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013 [ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c [ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800 [ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0 [ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180 [ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0 [ 3.897034] Register r1 information: non-paged memory [ 3.902097] Register r2 information: non-paged memory [ 3.907160] Register r3 information: non-slab/vmalloc memory [ 3.912832] Register r4 information: non-slab/vmalloc memory [ 3.918503] Register r5 information: NULL pointer [ 3.923217] Register r6 information: non-slab/vmalloc memory [ 3.928887] Register r7 information: NULL pointer [ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024 [ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048 [ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048 [ 3.959873] Register r11 information: non-slab/vmalloc memory [ 3.965632] Register r12 information: non-paged memory [ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval)) [ 3.977148] Stack: (0x81c359d0 to 0x81c36000) [ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e [ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0 [ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8 [ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848 [ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800 [ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000 [ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000 [ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8 [ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0 [ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950 [ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059 [ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400 [ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008 [ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340 [ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000 [ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4 [ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40 [ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800 [ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28 [ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700 [ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68 [ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88 [ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0 [ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60 [ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58 [ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c [ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800 [ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48 [ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c [ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90 [ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0 [ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8 [ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c [ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810 [ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c [ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c [ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68 [ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080 [ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650 [ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90 [ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800 [ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc [ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18 [ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298 [ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000 [ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20 [ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000 [ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000 [ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.391155] Backtrace: [ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c) [ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840 [ 4.410534] r4:810c35f0 [ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c) [ 4.424240] r5:00000045 r4:810c35f0 [ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384) [ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8 [ 4.446917] r4:00000008 [ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4) [ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010 [ 4.468556] r4:81fbb700 [ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0) [ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800 [ 4.490276] r4:81fbb700 [ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4) [ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800 [ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130) [ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800 [ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0) [ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240 [ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184) [ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80 [ 4.553440] r4:81fe9740 [ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20) [ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440 [ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8) [ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8) [ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000 [ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460) [ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810 [ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230) [ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810 [ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0) [ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310 [ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c) [ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001 [ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8) [ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000 [ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190) [ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810 [ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20) [ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080 [ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c) [ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0) [ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080 [ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c) [ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00 [ 4.738981] r4:810c50c0 r3:80615bc0 [ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570) [ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800 [ 4.758608] r4:817eeb00 [ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190) [ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00 [ 4.776417] r4:817efa40 [ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24) [ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8) [ 4.791266] 5fa0: 00000000 00000000 00000000 00000000 [ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8 [ 4.822120] r4:817efa40 [ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018) Split the registration from the STDP4028 probe routine and only perform registration once both the STDP4028 and STDP2690 have probed. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> CC: Peter Senna Tschudin <peter.senna@gmail.com> CC: Martyn Welch <martyn.welch@collabora.co.uk> CC: Neil Armstrong <narmstrong@baylibre.com> CC: Robert Foss <robert.foss@linaro.org> CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> CC: Jonas Karlman <jonas@kwiboo.se> CC: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 04d8066 ] Currently, with an unknown recv_type, mwifiex_usb_recv just return -1 without restoring the skb. Next time mwifiex_usb_rx_complete is invoked with the same skb, calling skb_put causes skb_over_panic. The bug is triggerable with a compromised/malfunctioning usb device. After applying the patch, skb_over_panic no longer shows up with the same input. Attached is the panic report from fuzzing. skbuff: skb_over_panic: text:000000003bf1b5fa len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8 tail:0x844 end:0x840 dev:<NULL> kernel BUG at net/core/skbuff.c:109! invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60 RIP: 0010:skb_panic+0x15f/0x161 Call Trace: <IRQ> ? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] skb_put.cold+0x24/0x24 mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb] __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 </IRQ> Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit a93789a ] Currently 'ar' reference is not added in skb_cb during WMI mgmt tx. Though this is generally not used during tx completion callbacks, on interface removal the remaining idr cleanup callback uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence fill them during tx call for proper usage. Also free the skb which is missing currently in these callbacks. Crash_info: [19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [19282.489515] pgd = 91eb8000 [19282.496702] [00000000] *pgd=00000000 [19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k] [19282.789170] LR is at idr_for_each+0xa0/0xc8 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…_work BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit ed05c7c ] When enable debug config, it print below warning while shut down wlan interface shuh as run "ifconfig wlan0 down". The reason is because ar->regd_update_work is ran once, and it is will call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which is running in workqueue of ieee80211_local queued by ieee80211_queue_work(). Another thread from "ifconfig wlan0 down" will also accuqire the lock by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and then it call ieee80211_stop_device() to flush_workqueue(local->workqueue), this will wait the workqueue of ieee80211_local finished. Then deadlock will happen easily if the two thread run meanwhile. Below warning disappeared after this change. [ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) [ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan [ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0 [ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0 [ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0 [ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20 [ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error [ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0 [ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0 [ 914.117583] ====================================================== [ 914.117592] WARNING: possible circular locking dependency detected [ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE [ 914.117611] ------------------------------------------------------ [ 914.117618] ifconfig/2805 is trying to acquire lock: [ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470 [ 914.117674] but task is already holding lock: [ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.117872] which lock already depends on the new lock. [ 914.117880] the existing dependency chain (in reverse order) is: [ 914.117888] -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}: [ 914.117910] __mutex_lock+0xa0/0x9c0 [ 914.117930] mutex_lock_nested+0x1b/0x20 [ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211] [ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211] [ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211] [ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211] [ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k] [ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k] [ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k] [ 914.118656] process_one_work+0x228/0x670 [ 914.118669] worker_thread+0x4d/0x440 [ 914.118680] kthread+0x16d/0x1b0 [ 914.118697] ret_from_fork+0x22/0x30 [ 914.118714] -> #2 (rtnl_mutex){+.+.}-{4:4}: [ 914.118736] __mutex_lock+0xa0/0x9c0 [ 914.118751] mutex_lock_nested+0x1b/0x20 [ 914.118767] rtnl_lock+0x17/0x20 [ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k] [ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k] [ 914.118897] process_one_work+0x228/0x670 [ 914.118909] worker_thread+0x4d/0x440 [ 914.118920] kthread+0x16d/0x1b0 [ 914.118934] ret_from_fork+0x22/0x30 [ 914.118948] -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}: [ 914.118972] process_one_work+0x1fa/0x670 [ 914.118984] worker_thread+0x4d/0x440 [ 914.118996] kthread+0x16d/0x1b0 [ 914.119010] ret_from_fork+0x22/0x30 [ 914.119023] -> #0 ((wq_completion)phy0){+.+.}-{0:0}: [ 914.119045] __lock_acquire+0x146d/0x1cf0 [ 914.119057] lock_acquire+0x19b/0x360 [ 914.119067] flush_workqueue+0xae/0x470 [ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.119409] ieee80211_stop+0x45/0x180 [mac80211] [ 914.119557] __dev_close_many+0xb3/0x120 [ 914.119573] __dev_change_flags+0xc3/0x1d0 [ 914.119590] dev_change_flags+0x29/0x70 [ 914.119605] devinet_ioctl+0x653/0x810 [ 914.119620] inet_ioctl+0x193/0x1e0 [ 914.119631] sock_do_ioctl+0x4d/0xf0 [ 914.119649] sock_ioctl+0x262/0x340 [ 914.119665] __x64_sys_ioctl+0x96/0xd0 [ 914.119678] do_syscall_64+0x3d/0xd0 [ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.119709] other info that might help us debug this: [ 914.119717] Chain exists of: (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx [ 914.119745] Possible unsafe locking scenario: [ 914.119752] CPU0 CPU1 [ 914.119758] ---- ---- [ 914.119765] lock(&rdev->wiphy.mtx); [ 914.119778] lock(rtnl_mutex); [ 914.119792] lock(&rdev->wiphy.mtx); [ 914.119807] lock((wq_completion)phy0); [ 914.119819] *** DEADLOCK *** [ 914.119827] 2 locks held by ifconfig/2805: [ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20 [ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.120039] stack backtrace: [ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1 [ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 914.120074] Call Trace: [ 914.120084] <TASK> [ 914.120094] dump_stack_lvl+0x73/0xa4 [ 914.120119] dump_stack+0x10/0x12 [ 914.120135] print_circular_bug.isra.44+0x221/0x2e0 [ 914.120165] check_noncircular+0x106/0x150 [ 914.120203] __lock_acquire+0x146d/0x1cf0 [ 914.120215] ? __lock_acquire+0x146d/0x1cf0 [ 914.120245] lock_acquire+0x19b/0x360 [ 914.120259] ? flush_workqueue+0x87/0x470 [ 914.120286] ? lockdep_init_map_type+0x6b/0x250 [ 914.120310] flush_workqueue+0xae/0x470 [ 914.120327] ? flush_workqueue+0x87/0x470 [ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150 [ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.120906] ieee80211_stop+0x45/0x180 [mac80211] [ 914.121060] __dev_close_many+0xb3/0x120 [ 914.121081] __dev_change_flags+0xc3/0x1d0 [ 914.121109] dev_change_flags+0x29/0x70 [ 914.121131] devinet_ioctl+0x653/0x810 [ 914.121149] ? __might_fault+0x77/0x80 [ 914.121179] inet_ioctl+0x193/0x1e0 [ 914.121194] ? inet_ioctl+0x193/0x1e0 [ 914.121218] ? __might_fault+0x77/0x80 [ 914.121238] ? _copy_to_user+0x68/0x80 [ 914.121266] sock_do_ioctl+0x4d/0xf0 [ 914.121283] ? inet_stream_connect+0x60/0x60 [ 914.121297] ? sock_do_ioctl+0x4d/0xf0 [ 914.121329] sock_ioctl+0x262/0x340 [ 914.121347] ? sock_ioctl+0x262/0x340 [ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280 [ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50 [ 914.121416] __x64_sys_ioctl+0x96/0xd0 [ 914.121430] ? br_ioctl_call+0x90/0x90 [ 914.121445] ? __x64_sys_ioctl+0x96/0xd0 [ 914.121465] do_syscall_64+0x3d/0xd0 [ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.121497] RIP: 0033:0x7f0ed051737b [ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48 [ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b [ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004 [ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001 [ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe [ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 [ 914.121620] </TASK> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 767c94c ] With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports below warning: [ 166.059415] ============================================ [ 166.059416] WARNING: possible recursive locking detected [ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O [ 166.059420] -------------------------------------------- [ 166.059421] kworker/0:2/116 is trying to acquire lock: [ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059440] but task is already holding lock: [ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059491] other info that might help us debug this: [ 166.059492] Possible unsafe locking scenario: [ 166.059493] CPU0 [ 166.059494] ---- [ 166.059495] lock(&srng->lock); [ 166.059498] lock(&srng->lock); [ 166.059500] *** DEADLOCK *** [ 166.059501] May be due to missing lock nesting notation [ 166.059502] 3 locks held by kworker/0:2/116: [ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059532] stack backtrace: [ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10 [ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019 [ 166.059539] Workqueue: events free_obj_work [ 166.059543] Call Trace: [ 166.059545] <IRQ> [ 166.059547] dump_stack_lvl+0x56/0x7b [ 166.059552] __lock_acquire+0xb9a/0x1a50 [ 166.059556] lock_acquire+0x1e2/0x330 [ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059571] _raw_spin_lock_bh+0x33/0x70 [ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k] [ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k] [ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k] [ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci] [ 166.059659] __napi_poll+0x28/0x230 [ 166.059664] net_rx_action+0x285/0x310 [ 166.059668] __do_softirq+0xe6/0x4d2 [ 166.059672] irq_exit_rcu+0xd2/0xf0 [ 166.059675] common_interrupt+0xa5/0xc0 [ 166.059678] </IRQ> [ 166.059679] <TASK> [ 166.059680] asm_common_interrupt+0x1e/0x40 [ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a [ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206 [ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006 [ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001 [ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001 [ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840 [ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001 [ 166.059704] free_debug_processing+0x257/0x3d0 [ 166.059708] ? free_obj_work+0x1f5/0x250 [ 166.059712] __slab_free+0x374/0x5a0 [ 166.059718] ? kmem_cache_free+0x2e1/0x370 [ 166.059721] ? free_obj_work+0x1f5/0x250 [ 166.059724] kmem_cache_free+0x2e1/0x370 [ 166.059727] free_obj_work+0x1f5/0x250 [ 166.059731] process_one_work+0x28b/0x660 [ 166.059735] ? process_one_work+0x660/0x660 [ 166.059738] worker_thread+0x37/0x390 [ 166.059741] ? process_one_work+0x660/0x660 [ 166.059743] kthread+0x176/0x1a0 [ 166.059746] ? set_kthread_struct+0x40/0x40 [ 166.059749] ret_from_fork+0x22/0x30 [ 166.059754] </TASK> Since these two lockes are both initialized in ath11k_hal_srng_setup, they are assigned with the same key. As a result lockdep suspects that the task is trying to acquire the same lock (due to same key) while already holding it, and thus reports the DEADLOCK warning. However as they are different spinlock instances, the warning is false positive. On the other hand, even no dead lock indeed, this is a major issue for upstream regression testing as it disables lockdep functionality. Fix it by assigning separate lock class key for each srng->lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 commit efd21e1 upstream. When enable the kernel debug config, there is below calltrace detected: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339 caller is debug_smp_processor_id+0x20/0x30 CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x24/0x30 dump_stack+0xf0/0x13c check_preemption_disabled+0x100/0x110 debug_smp_processor_id+0x20/0x30 dpaa2_caam_enqueue+0x10c/0x25c ...... cryptomgr_test+0x38/0x60 kthread+0x158/0x164 ret_from_fork+0x10/0x38 According to the comment in commit ac5d15b("crypto: caam/qi2 - use affine DPIOs "), because preemption is no longer disabled while trying to enqueue an FQID, it might be possible to run the enqueue on a different CPU(due to migration, when in process context), however this wouldn't be a functionality issue. But there will be above calltrace when enable kernel debug config. So, replace this_cpu_ptr with raw_cpu_ptr to avoid above call trace. Fixes: ac5d15b ("crypto: caam/qi2 - use affine DPIOs") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…uffers BugLink: https://bugs.launchpad.net/bugs/1962230 commit 3fea4d9 upstream. it seems freeing the write buffers in the error path of the ubifs_remount_rw() is wrong. It leads later to a kernel oops like this: [10016.431274] UBIFS (ubi0:0): start fixing up free space [10090.810042] UBIFS (ubi0:0): free space fixup complete [10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4 [10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 517 [10105.275498] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [10105.284352] Mem abort info: [10105.287160] ESR = 0x96000006 [10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits [10105.295592] SET = 0, FnV = 0 [10105.298652] EA = 0, S1PTW = 0 [10105.301848] Data abort info: [10105.304723] ISV = 0, ISS = 0x00000006 [10105.308573] CM = 0, WnR = 0 [10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000 [10105.318034] [0000000000000030] pgd=00000000f6cee003, pud=00000000f4884003, pmd=0000000000000000 [10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP [10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 nvme nvme_core cryptodev(O) [10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O 5.4.3 #1 [10105.349517] Hardware name: HYPEX CPU (DT) [10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO) [10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.364596] lr : mutex_lock+0x1c/0x34 [10105.368253] sp : ffff000075633aa0 [10105.371563] x29: ffff000075633aa0 x28: 0000000000000001 [10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004 [10105.382185] x25: 0000000000000030 x24: 0000000000000000 [10105.387495] x23: 0000000000000000 x22: 0000000000000038 [10105.392807] x21: 000000000000000c x20: ffff000076fa80c8 [10105.398119] x19: ffff000076fa8000 x18: 0000000000000000 [10105.403429] x17: 0000000000000000 x16: 0000000000000000 [10105.408741] x15: 0000000000000000 x14: fefefefefefefeff [10105.414052] x13: 0000000000000000 x12: 0000000000000fe0 [10105.419364] x11: 0000000000000fe0 x10: ffff000076709020 [10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0 [10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030 [10105.435297] x5 : 0000000000000000 x4 : 0000000000000000 [10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040 [10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030 [10105.451232] Call trace: [10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.459600] ubifs_garbage_collect+0xb4/0x334 [10105.463956] ubifs_budget_space+0x398/0x458 [10105.468139] ubifs_create+0x50/0x180 [10105.471712] path_openat+0x6a0/0x9b0 [10105.475284] do_filp_open+0x34/0x7c [10105.478771] do_sys_open+0x78/0xe4 [10105.482170] __arm64_sys_openat+0x1c/0x24 [10105.486180] el0_svc_handler+0x84/0xc8 [10105.489928] el0_svc+0x8/0xc [10105.492808] Code: 5280001 17fffffb d2800003 f9800011 (c85ffc05) [10105.498903] ---[ end trace 46b721d93267a586 ]--- To reproduce the problem: 1. Filesystem initially mounted read-only, free space fixup flag set. 2. mount -o remount,rw <mountpoint> 3. it takes some time (free space fixup running) ... try to terminate running mount by CTRL-C ... does not respond, only after free space fixup is complete ... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4" 4. mount -o remount,rw <mountpoint> ... now finished instantly (fixup already done). 5. Create file or just unmount the filesystem and we get the oops. Cc: <stable@vger.kernel.org> Fixes: b50b9f4 ("UBIFS: do not free write-buffers when in R/O mode") Signed-off-by: Petr Cvachoucek <cvachoucek@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 commit 84cc695 upstream. When using the tpm_tis-spi driver on a system missing the physical TPM, a null pointer exception was observed. [ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 0.939020] pgd = 10c753cb [ 0.939237] [00000004] *pgd=00000000 [ 0.939808] Internal error: Oops: 5 [#1] SMP ARM [ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1 [ 0.940364] Hardware name: Generic DT based system [ 0.940601] Workqueue: events_unbound async_run_entry_fn [ 0.941048] PC is at tpm_tis_remove+0x28/0xb4 [ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which was not initialized in 'tpm_tis_core_init' prior to the first error. Move the initialization of drvdata earlier so 'tpm_tis_remove' has access to it. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Fixes: 79ca6f7 ("tpm: fix Atmel TPM crash caused by too frequent queries") Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…rors BugLink: https://bugs.launchpad.net/bugs/1962230 commit 085a9f4 upstream. Use down_read_nested() and down_write_nested() when taking the ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in the path to the PCI root bus as lock subclass parameter. This fixes the following false-positive lockdep report when unplugging a Lenovo X1C8 from a Lenovo 2nd gen TB3 dock: pcieport 0000:06:01.0: pciehp: Slot(1): Link Down pcieport 0000:06:01.0: pciehp: Slot(1): Card not present ============================================ WARNING: possible recursive locking detected 5.16.0-rc2+ #621 Not tainted -------------------------------------------- irq/124-pciehp/86 is trying to acquire lock: ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80 but task is already holding lock: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ctrl->reset_lock); lock(&ctrl->reset_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by irq/124-pciehp/86: #0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 #1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110 #2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40 stack backtrace: CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621 Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021 Call Trace: <TASK> dump_stack_lvl+0x59/0x73 __lock_acquire.cold+0xc5/0x2c6 lock_acquire+0xb5/0x2b0 down_read+0x3e/0x50 pciehp_check_presence+0x23/0x80 pciehp_runtime_resume+0x5c/0xa0 device_for_each_child+0x45/0x70 pcie_port_device_runtime_resume+0x20/0x30 pci_pm_runtime_resume+0xa7/0xc0 __rpm_callback+0x41/0x110 rpm_callback+0x59/0x70 rpm_resume+0x512/0x7b0 __pm_runtime_resume+0x4a/0x90 __device_release_driver+0x28/0x240 device_release_driver+0x26/0x40 pci_stop_bus_device+0x68/0x90 pci_stop_bus_device+0x2c/0x90 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0x6c/0x110 pciehp_disable_slot+0x5b/0xe0 pciehp_handle_presence_or_link_change+0xc3/0x2f0 pciehp_ist+0x179/0x180 This lockdep warning is triggered because with Thunderbolt, hotplug ports are nested. When removing multiple devices in a daisy-chain, each hotplug port's reset_lock may be acquired recursively. It's never the same lock, so the lockdep splat is a false positive. Because locks at the same hierarchy level are never acquired recursively, a per-level lockdep class is sufficient to fix the lockdep warning. The choice to use one lockdep subclass per pcie-hotplug controller in the path to the root-bus was made to conserve class keys because their number is limited and the complexity grows quadratically with number of keys according to Documentation/locking/lockdep-design.rst. Link: https://lore.kernel.org/linux-pci/20190402021933.GA2966@mit.edu/ Link: https://lore.kernel.org/linux-pci/de684a28-9038-8fc6-27ca-3f6f2f6400d7@redhat.com/ Link: https://lore.kernel.org/r/20211217141709.379663-1-hdegoede@redhat.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855 Reported-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 commit 380a009 upstream. We got issue as follows when run syzkaller: [ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user [ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only [ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0' [ 167.983601] ------------[ cut here ]------------ [ 167.984245] kernel BUG at fs/ext4/inode.c:847! [ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123 [ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504 [ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244 [ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282 [ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000 [ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66 [ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09 [ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8 [ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001 [ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000 [ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0 [ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.001899] Call Trace: [ 168.002235] <TASK> [ 168.007167] ext4_bread+0xd/0x53 [ 168.007612] ext4_quota_write+0x20c/0x5c0 [ 168.010457] write_blk+0x100/0x220 [ 168.010944] remove_free_dqentry+0x1c6/0x440 [ 168.011525] free_dqentry.isra.0+0x565/0x830 [ 168.012133] remove_tree+0x318/0x6d0 [ 168.014744] remove_tree+0x1eb/0x6d0 [ 168.017346] remove_tree+0x1eb/0x6d0 [ 168.019969] remove_tree+0x1eb/0x6d0 [ 168.022128] qtree_release_dquot+0x291/0x340 [ 168.023297] v2_release_dquot+0xce/0x120 [ 168.023847] dquot_release+0x197/0x3e0 [ 168.024358] ext4_release_dquot+0x22a/0x2d0 [ 168.024932] dqput.part.0+0x1c9/0x900 [ 168.025430] __dquot_drop+0x120/0x190 [ 168.025942] ext4_clear_inode+0x86/0x220 [ 168.026472] ext4_evict_inode+0x9e8/0xa22 [ 168.028200] evict+0x29e/0x4f0 [ 168.028625] dispose_list+0x102/0x1f0 [ 168.029148] evict_inodes+0x2c1/0x3e0 [ 168.030188] generic_shutdown_super+0xa4/0x3b0 [ 168.030817] kill_block_super+0x95/0xd0 [ 168.031360] deactivate_locked_super+0x85/0xd0 [ 168.031977] cleanup_mnt+0x2bc/0x480 [ 168.033062] task_work_run+0xd1/0x170 [ 168.033565] do_exit+0xa4f/0x2b50 [ 168.037155] do_group_exit+0xef/0x2d0 [ 168.037666] __x64_sys_exit_group+0x3a/0x50 [ 168.038237] do_syscall_64+0x3b/0x90 [ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae In order to reproduce this problem, the following conditions need to be met: 1. Ext4 filesystem with no journal; 2. Filesystem image with incorrect quota data; 3. Abort filesystem forced by user; 4. umount filesystem; As in ext4_quota_write: ... if (EXT4_SB(sb)->s_journal && !handle) { ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" " cancelled because transaction is not started", (unsigned long long)off, (unsigned long long)len); return -EIO; } ... We only check handle if NULL when filesystem has journal. There is need check handle if NULL even when filesystem has no journal. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1962230 commit 298b5c5 upstream. We got issue as follows when run syzkaller test: [ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user [ 1901.130901] Aborting journal on device vda-8. [ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal [ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal [ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal [ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal [ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted [ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal [ 1901.136915] ================================================================== [ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal [ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal [ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968 [ 1901.138817] [ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal [ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1 [ 1901.146479] Hardware name: linux,dummy-virt (DT) [ 1901.147317] Call trace: [ 1901.147552] dump_backtrace+0x0/0x2d8 [ 1901.147898] show_stack+0x28/0x38 [ 1901.148215] dump_stack+0xec/0x15c [ 1901.148746] kasan_report+0x108/0x338 [ 1901.149207] __asan_load8+0x58/0xb0 [ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4] [ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4] [ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4] [ 1901.151985] evict+0x1a4/0x378 [ 1901.152353] iput+0x310/0x428 [ 1901.152733] do_unlinkat+0x260/0x428 [ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0 [ 1901.153455] el0_svc_common+0xc8/0x320 [ 1901.153799] el0_svc_handler+0xf8/0x160 [ 1901.154265] el0_svc+0x10/0x218 [ 1901.154682] ================================================================== This issue may happens like this: Process1 Process2 ext4_evict_inode ext4_journal_start ext4_truncate ext4_ind_truncate ext4_free_branches ext4_ind_truncate_ensure_credits ext4_journal_ensure_credits_fn ext4_journal_restart handle->h_transaction = NULL; mount -o remount,abort /mnt -> trigger JBD abort start_this_handle -> will return failed ext4_xattr_delete_inode ext4_journal_ensure_credits ext4_journal_ensure_credits_fn __ext4_journal_ensure_credits jbd2_handle_buffer_credits journal = handle->h_transaction->t_journal; ->null-ptr-deref Now, indirect truncate process didn't handle error. To solve this issue maybe simply add check handle is abort in '__ext4_journal_ensure_credits' is enough, and i also think this is necessary. Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20211224100341.3299128-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…jects are used BugLink: https://bugs.launchpad.net/bugs/1962230 [ Upstream commit 885751e ] Creating routes with nexthop objects while in switchdev mode leads to access to un-allocated memory and trigger bellow call trace due to hitting WARN_ON. This is caused due to illegal usage of fib_info_nh in TC tunnel FIB event handling to resolve the FIB device while fib_info built in with nexthop. Fixed by ignoring attempts to use nexthop objects with routes until support can be properly added. WARNING: CPU: 1 PID: 1724 at include/net/nexthop.h:468 mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core] CPU: 1 PID: 1724 Comm: ip Not tainted 5.15.0_for_upstream_min_debug_2021_11_09_02_04 #1 RIP: 0010:mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core] RSP: 0018:ffff8881349f7910 EFLAGS: 00010202 RAX: ffff8881492f1980 RBX: ffff8881349f79e8 RCX: 0000000000000000 RDX: ffff8881349f79e8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8881349f7950 R08: 00000000000000fe R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88811e9d0000 R13: ffff88810eb62000 R14: ffff888106710268 R15: 0000000000000018 FS: 00007f1d5ca6e800(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffedba44ff8 CR3: 0000000129808004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> atomic_notifier_call_chain+0x42/0x60 call_fib_notifiers+0x21/0x40 fib_table_insert+0x479/0x6d0 ? try_charge_memcg+0x480/0x6d0 inet_rtm_newroute+0x65/0xb0 rtnetlink_rcv_msg+0x2af/0x360 ? page_add_file_rmap+0x13/0x130 ? do_set_pte+0xcd/0x120 ? rtnl_calcit.isra.0+0x120/0x120 netlink_rcv_skb+0x4e/0xf0 netlink_unicast+0x1ee/0x2b0 netlink_sendmsg+0x22e/0x460 sock_sendmsg+0x33/0x40 ____sys_sendmsg+0x1d1/0x1f0 ___sys_sendmsg+0xab/0xf0 ? __mod_memcg_lruvec_state+0x40/0x60 ? __mod_lruvec_page_state+0x95/0xd0 ? page_add_new_anon_rmap+0x4e/0xf0 ? __handle_mm_fault+0xec6/0x1470 __sys_sendmsg+0x51/0x90 ? internal_get_user_pages_fast+0x480/0xa10 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 8914add ("net/mlx5e: Handle FIB events to update tunnel endpoint device") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1964422 commit 802d4d2 upstream Commit 0a6890b ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1964422 commit 9df4784 upstream. Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456 ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Reviewed-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Testeb-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

…e_put() BugLink: https://bugs.launchpad.net/bugs/1964422 commit 847f9ea upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang <guazhang@redhat.com> Co-developed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1964422 [ Upstream commit 3f5f766 ] Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e2 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1964422 commit 8b59b0a upstream. arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7) Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support") Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: huangshaobo <huangshaobo6@huawei.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1964422 [ Upstream commit c0bf3d8 ] We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. Fixes: fd57770 ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1965589 commit ec41332 upstream. Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891 ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1966021 commit e804861 upstream. Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 #7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] <TASK> [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] </TASK> [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 #7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] <TASK> [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc75/0xe30 [btrfs] [372.977706] start_transaction+0x938/0x10a0 [btrfs] [372.997168] transaction_kthread+0x19d/0x3c0 [btrfs] [373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs] [373.031678] kthread+0x3b9/0x490 [373.047420] ? _raw_spin_unlock_irq+0x24/0x50 [373.064645] ? set_kthread_struct+0x100/0x100 [373.078571] ret_from_fork+0x22/0x30 [373.091197] </TASK> [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds. [373.114147] Not tainted 5.16.0-rc8 #7 [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000 [373.140998] Call Trace: [373.145501] <TASK> [373.149654] __schedule+0xb56/0x4850 [373.155306] ? io_schedule_timeout+0x190/0x190 [373.161965] ? lockdep_hardirqs_on+0x7e/0x100 [373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [373.175468] schedule+0xe0/0x270 [373.180814] wait_for_commit+0x104/0x150 [btrfs] [373.187643] ? test_and_set_bit+0x20/0x20 [btrfs] [373.194772] ? kmem_cache_free+0x124/0x550 [373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs] [373.208738] ? finish_wait+0x270/0x270 [373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs] [373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs] [373.230233] ? join_transaction+0x255/0xe30 [btrfs] [373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs] [373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [373.253296] relocate_block_group+0x105/0xc20 [btrfs] [373.260533] ? mutex_lock_io_nested+0x1270/0x1270 [373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs] [373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs] [373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs] [373.291934] ? kmem_cache_free+0x124/0x550 [373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs] [373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs] [373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs] [373.320227] ? lock_release+0x3a9/0x6d0 [373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs] [373.333591] ? lock_is_held_type+0xe4/0x140 [373.340031] ? rcu_read_lock_sched_held+0x3f/0x70 [373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs] [373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs] [373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.383841] ? find_held_lock+0x2c/0x110 [373.389993] ? lock_release+0x3a9/0x6d0 [373.395828] ? mntput_no_expire+0xf7/0xad0 [373.402083] ? lock_is_held_type+0xe4/0x140 [373.408249] ? vfs_fileattr_set+0x9f0/0x9f0 [373.414486] ? selinux_file_ioctl+0x349/0x4e0 [373.420938] ? trace_raw_output_lock+0xb4/0xe0 [373.427442] ? selinux_inode_getsecctx+0x80/0x80 [373.434224] ? lockdep_hardirqs_on+0x7e/0x100 [373.440660] ? force_qs_rnp+0x2a0/0x6b0 [373.446534] ? lock_is_held_type+0x9b/0x140 [373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0 [373.459732] ? security_file_ioctl+0x50/0x90 [373.466089] __x64_sys_ioctl+0x127/0x190 [373.472022] do_syscall_64+0x3b/0x90 [373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.484823] RIP: 0033:0x7f8f4af7e2bb [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003 [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0 [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001 [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002 [373.546506] </TASK> [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds. [373.559383] Not tainted 5.16.0-rc8 #7 [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000 [373.586314] Call Trace: [373.590846] <TASK> [373.595121] __schedule+0xb56/0x4850 [373.600901] ? __lock_acquire+0x23db/0x5030 [373.607176] ? io_schedule_timeout+0x190/0x190 [373.613954] schedule+0xe0/0x270 [373.619157] schedule_timeout+0x168/0x220 [373.625170] ? usleep_range_state+0x150/0x150 [373.631653] ? mark_held_locks+0x9e/0xe0 [373.637767] ? do_raw_spin_lock+0x11e/0x250 [373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [373.651267] ? _raw_spin_unlock_irq+0x24/0x50 [373.657677] ? lockdep_hardirqs_on+0x7e/0x100 [373.664103] wait_for_completion+0x163/0x250 [373.670437] ? bit_wait_timeout+0x160/0x160 [373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs] [373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs] [373.691340] ? down_write+0xd0/0x130 [373.696880] ? down_write_killable+0x150/0x150 [373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs] [373.710061] ? find_held_lock+0x2c/0x110 [373.716192] ? lock_release+0x3a9/0x6d0 [373.722047] ? __handle_mm_fault+0x23cd/0x3050 [373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.737032] ? set_pte+0x6a/0x90 [373.742271] ? do_raw_spin_unlock+0x55/0x1f0 [373.748506] ? lock_is_held_type+0xe4/0x140 [373.754792] ? vfs_fileattr_set+0x9f0/0x9f0 [373.761083] ? selinux_file_ioctl+0x349/0x4e0 [373.767521] ? selinux_inode_getsecctx+0x80/0x80 [373.774247] ? __up_read+0x182/0x6e0 [373.780026] ? count_memcg_events.constprop.0+0x46/0x60 [373.787281] ? up_write+0x460/0x460 [373.792932] ? security_file_ioctl+0x50/0x90 [373.799232] __x64_sys_ioctl+0x127/0x190 [373.805237] do_syscall_64+0x3b/0x90 [373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.818102] RIP: 0033:0x7f1383ea02bb [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003 [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078 [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000 [373.879838] </TASK> [373.884018] Showing all locks held in the system: [373.894250] 3 locks held by kworker/4:1/58: [373.900356] 1 lock held by khungtaskd/63: [373.906333] #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 [373.917307] 3 locks held by kworker/u16:6/103: [373.923938] #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320 [373.936555] #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320 [373.951109] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs] [373.964027] 2 locks held by less/1803: [373.969982] #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 [373.981295] #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060 [373.992969] 1 lock held by btrfs-transacti/2347: [373.999893] #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs] [374.015872] 3 locks held by btrfs/3145: [374.022298] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs] [374.034456] #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs] [374.047646] #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs] [374.063295] 4 locks held by btrfs/3146: [374.069647] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs] [374.081601] #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs] [374.094283] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs] [374.106885] #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs] [374.126780] ============================================= To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem. Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1966021 commit fb5222a upstream. Patch series "page table check fixes and cleanups", v5. This patch (of 4): The pte entry that is used in pte_advanced_tests() is never removed from the page table at the end of the test. The issue is detected by page_table_check, to repro compile kernel with the following configs: CONFIG_DEBUG_VM_PGTABLE=y CONFIG_PAGE_TABLE_CHECK=y CONFIG_PAGE_TABLE_CHECK_ENFORCED=y During the boot the following BUG is printed: debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:162! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 ... The entry should be properly removed from the page table before the page is released to the free list. Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com Fixes: a5c3b9f ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Tested-by: Zi Yan <ziy@nvidia.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Wei Xu <weixugc@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1966021 commit c10a0f8 upstream. When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn(). We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole. for (pfn = start_pfn; pfn < end_pfn; pfn++) { struct page *page = pfn_to_online_page(pfn); if (!page) continue; ... } So we got a soft lockup: watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221] CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1 RIP: 0010:pfn_to_online_page+0x5/0xd0 Call Trace: ? kmemleak_scan+0x16a/0x440 kmemleak_write+0x306/0x3a0 ? common_file_perm+0x72/0x170 full_proxy_write+0x5c/0x90 vfs_write+0xb9/0x260 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae I did some tests with the patch. (1) amdgpu module unloaded before the patch: real 0m0.976s user 0m0.000s sys 0m0.968s after the patch: real 0m0.981s user 0m0.000s sys 0m0.973s (2) amdgpu module loaded before the patch: real 0m35.365s user 0m0.000s sys 0m35.354s after the patch: real 0m1.049s user 0m0.000s sys 0m1.042s Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com Signed-off-by: Lang Yu <lang.yu@amd.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/1966021 commit 5f8f55b upstream. An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: stable@vger.kernel.org Fixes: d99dc60 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2103829 commit 9d287e7 upstream. Error handling is missing when call to nla_put_u32() fails. Handle the error when the call to nla_put_u32() returns an error. The error was reported by Coverity Scan. Report: CID 1601525: (#1 of 1): Unused value (UNUSED_VALUE) returned_value: Assigning value from nla_put_u32(skb, XFRMA_SA_PCPU, x->pcpu_num) to err here, but that stored value is overwritten before it can be used Fixes: 1ddf991 ("xfrm: Add support for per cpu xfrm state handling.") Signed-off-by: Everest K.C. <everestkc@everestkc.com.np> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

…saction abort BugLink: https://bugs.launchpad.net/bugs/2104091 [ Upstream commit 0d85f5c ] If while we are doing a direct IO write a transaction abort happens, we mark all existing ordered extents with the BTRFS_ORDERED_IOERR flag (done at btrfs_destroy_ordered_extents()), and then after that if we enter btrfs_split_ordered_extent() and the ordered extent has bytes left (meaning we have a bio that doesn't cover the whole ordered extent, see details at btrfs_extract_ordered_extent()), we will fail on the following assertion at btrfs_split_ordered_extent(): ASSERT(!(flags & ~BTRFS_ORDERED_TYPE_FLAGS)); because the BTRFS_ORDERED_IOERR flag is set and the definition of BTRFS_ORDERED_TYPE_FLAGS is just the union of all flags that identify the type of write (regular, nocow, prealloc, compressed, direct IO, encoded). Fix this by returning an error from btrfs_extract_ordered_extent() if we find the BTRFS_ORDERED_IOERR flag in the ordered extent. The error will be the error that resulted in the transaction abort or -EIO if no transaction abort happened. This was recently reported by syzbot with the following trace: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 fail_dump lib/fault-inject.c:53 [inline] should_fail_ex+0x3b0/0x4e0 lib/fault-inject.c:154 should_failslab+0xac/0x100 mm/failslab.c:46 slab_pre_alloc_hook mm/slub.c:4072 [inline] slab_alloc_node mm/slub.c:4148 [inline] __do_kmalloc_node mm/slub.c:4297 [inline] __kmalloc_noprof+0xdd/0x4c0 mm/slub.c:4310 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] btrfs_chunk_alloc_add_chunk_item+0x244/0x1100 fs/btrfs/volumes.c:5742 reserve_chunk_space+0x1ca/0x2c0 fs/btrfs/block-group.c:4292 check_system_chunk fs/btrfs/block-group.c:4319 [inline] do_chunk_alloc fs/btrfs/block-group.c:3891 [inline] btrfs_chunk_alloc+0x77b/0xf80 fs/btrfs/block-group.c:4187 find_free_extent_update_loop fs/btrfs/extent-tree.c:4166 [inline] find_free_extent+0x42d1/0x5810 fs/btrfs/extent-tree.c:4579 btrfs_reserve_extent+0x422/0x810 fs/btrfs/extent-tree.c:4672 btrfs_new_extent_direct fs/btrfs/direct-io.c:186 [inline] btrfs_get_blocks_direct_write+0x706/0xfa0 fs/btrfs/direct-io.c:321 btrfs_dio_iomap_begin+0xbb7/0x1180 fs/btrfs/direct-io.c:525 iomap_iter+0x697/0xf60 fs/iomap/iter.c:90 __iomap_dio_rw+0xeb9/0x25b0 fs/iomap/direct-io.c:702 btrfs_dio_write fs/btrfs/direct-io.c:775 [inline] btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880 btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_pwritev fs/read_write.c:1146 [inline] __do_sys_pwritev2 fs/read_write.c:1204 [inline] __se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1281f85d29 RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148 RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29 RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003 R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328 </TASK> BTRFS error (device loop0 state A): Transaction aborted (error -12) BTRFS: error (device loop0 state A) in btrfs_chunk_alloc_add_chunk_item:5745: errno=-12 Out of memory BTRFS info (device loop0 state EA): forced readonly assertion failed: !(flags & ~BTRFS_ORDERED_TYPE_FLAGS), in fs/btrfs/ordered-data.c:1234 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:1234! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5321 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:btrfs_split_ordered_extent+0xd8d/0xe20 fs/btrfs/ordered-data.c:1234 RSP: 0018:ffffc9000d1df2b8 EFLAGS: 00010246 RAX: 0000000000000057 RBX: 000000000006a000 RCX: 9ce21886c4195300 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: 0000000000000091 R08: ffffffff817f0a3c R09: 1ffff92001a3bdf4 R10: dffffc0000000000 R11: fffff52001a3bdf5 R12: 1ffff1100a45f401 R13: ffff8880522fa018 R14: dffffc0000000000 R15: 000000000006a000 FS: 00007f12819fe6c0(0000) GS:ffff88801fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557750bd7da8 CR3: 00000000400ea000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_extract_ordered_extent fs/btrfs/direct-io.c:702 [inline] btrfs_dio_submit_io+0x4be/0x6d0 fs/btrfs/direct-io.c:737 iomap_dio_submit_bio fs/iomap/direct-io.c:85 [inline] iomap_dio_bio_iter+0x1022/0x1740 fs/iomap/direct-io.c:447 __iomap_dio_rw+0x13b7/0x25b0 fs/iomap/direct-io.c:703 btrfs_dio_write fs/btrfs/direct-io.c:775 [inline] btrfs_direct_write+0x610/0xa30 fs/btrfs/direct-io.c:880 btrfs_do_write_iter+0x2a0/0x760 fs/btrfs/file.c:1397 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_pwritev fs/read_write.c:1146 [inline] __do_sys_pwritev2 fs/read_write.c:1204 [inline] __se_sys_pwritev2+0x196/0x2b0 fs/read_write.c:1195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1281f85d29 RSP: 002b:00007f12819fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000148 RAX: ffffffffffffffda RBX: 00007f1282176080 RCX: 00007f1281f85d29 RDX: 0000000000000001 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 00007f12819fe090 R08: 0000000000000000 R09: 0000000000000003 R10: 0000000000007000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000000000000000 R14: 00007f1282176080 R15: 00007ffcb9e23328 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:btrfs_split_ordered_extent+0xd8d/0xe20 fs/btrfs/ordered-data.c:1234 RSP: 0018:ffffc9000d1df2b8 EFLAGS: 00010246 RAX: 0000000000000057 RBX: 000000000006a000 RCX: 9ce21886c4195300 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: 0000000000000091 R08: ffffffff817f0a3c R09: 1ffff92001a3bdf4 R10: dffffc0000000000 R11: fffff52001a3bdf5 R12: 1ffff1100a45f401 R13: ffff8880522fa018 R14: dffffc0000000000 R15: 000000000006a000 FS: 00007f12819fe6c0(0000) GS:ffff88801fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557750bd7da8 CR3: 00000000400ea000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 In this case the transaction abort was due to (an injected) memory allocation failure when attempting to allocate a new chunk. Reported-by: syzbot+f60d8337a5c8e8d92a77@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6777f2dd.050a0220.178762.0045.GAE@google.com/ Fixes: 52b1fdc ("btrfs: handle completed ordered extents in btrfs_split_ordered_extent") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104091 [ Upstream commit 8d9beb4 ] A GSP event message consists three parts: message header, RPC header, message body. GSP calculates the number of pages to write from the total size of a GSP message. This behavior can be observed from the movement of the write pointer. However, nvkm takes only the size of RPC header and message body as the message size when advancing the read pointer. When handling a two-page GSP message in the non rollback case, It wrongly takes the message body of the previous message as the message header of the next message. As the "message length" tends to be zero, in the calculation of size needs to be copied (0 - size of (message header)), the size needs to be copied will be "0xffffffxx". It also triggers a kernel panic due to a NULL pointer error. [ 547.614102] msg: 00000f90: ff ff ff ff ff ff ff ff 40 d7 18 fb 8b 00 00 00 ........@....... [ 547.622533] msg: 00000fa0: 00 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00 ................ [ 547.630965] msg: 00000fb0: ff ff ff ff ff ff ff ff 00 00 00 00 ff ff ff ff ................ [ 547.639397] msg: 00000fc0: ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ [ 547.647832] nvkm 0000:c1:00.0: gsp: peek msg rpc fn:0 len:0x0/0xffffffffffffffe0 [ 547.655225] nvkm 0000:c1:00.0: gsp: get msg rpc fn:0 len:0x0/0xffffffffffffffe0 [ 547.662532] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 547.669485] #PF: supervisor read access in kernel mode [ 547.674624] #PF: error_code(0x0000) - not-present page [ 547.679755] PGD 0 P4D 0 [ 547.682294] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 547.686643] CPU: 22 PID: 322 Comm: kworker/22:1 Tainted: G E 6.9.0-rc6+ #1 [ 547.694893] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022 [ 547.702626] Workqueue: events r535_gsp_msgq_work [nvkm] [ 547.707921] RIP: 0010:r535_gsp_msg_recv+0x87/0x230 [nvkm] [ 547.713375] Code: 00 8b 70 08 48 89 e1 31 d2 4c 89 f7 e8 12 f5 ff ff 48 89 c5 48 85 c0 0f 84 cf 00 00 00 48 81 fd 00 f0 ff ff 0f 87 c4 00 00 00 <8b> 55 10 41 8b 46 30 85 d2 0f 85 f6 00 00 00 83 f8 04 76 10 ba 05 [ 547.732119] RSP: 0018:ffffabe440f87e10 EFLAGS: 00010203 [ 547.737335] RAX: 0000000000000010 RBX: 0000000000000008 RCX: 000000000000003f [ 547.744461] RDX: 0000000000000000 RSI: ffffabe4480a8030 RDI: 0000000000000010 [ 547.751585] RBP: 0000000000000010 R08: 0000000000000000 R09: ffffabe440f87bb0 [ 547.758707] R10: ffffabe440f87dc8 R11: 0000000000000010 R12: 0000000000000000 [ 547.765834] R13: 0000000000000000 R14: ffff9351df1e5000 R15: 0000000000000000 [ 547.772958] FS: 0000000000000000(0000) GS:ffff93708eb00000(0000) knlGS:0000000000000000 [ 547.781035] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 547.786771] CR2: 0000000000000020 CR3: 00000003cc220002 CR4: 0000000000770ef0 [ 547.793896] PKRU: 55555554 [ 547.796600] Call Trace: [ 547.799046] <TASK> [ 547.801152] ? __die+0x20/0x70 [ 547.804211] ? page_fault_oops+0x75/0x170 [ 547.808221] ? print_hex_dump+0x100/0x160 [ 547.812226] ? exc_page_fault+0x64/0x150 [ 547.816152] ? asm_exc_page_fault+0x22/0x30 [ 547.820341] ? r535_gsp_msg_recv+0x87/0x230 [nvkm] [ 547.825184] r535_gsp_msgq_work+0x42/0x50 [nvkm] [ 547.829845] process_one_work+0x196/0x3d0 [ 547.833861] worker_thread+0x2fc/0x410 [ 547.837613] ? __pfx_worker_thread+0x10/0x10 [ 547.841885] kthread+0xdf/0x110 [ 547.845031] ? __pfx_kthread+0x10/0x10 [ 547.848775] ret_from_fork+0x30/0x50 [ 547.852354] ? __pfx_kthread+0x10/0x10 [ 547.856097] ret_from_fork_asm+0x1a/0x30 [ 547.860019] </TASK> [ 547.862208] Modules linked in: nvkm(E) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) mlx5_ib(E) edac_mce_amd(E) kvm_amd(E) ib_uverbs(E) kvm(E) ib_core(E) acpi_ipmi(E) ipmi_si(E) ipmi_devintf(E) mxm_wmi(E) joydev(E) rapl(E) ptdma(E) i2c_piix4(E) acpi_cpufreq(E) wmi_bmof(E) pcspkr(E) k10temp(E) ipmi_msghandler(E) xfs(E) libcrc32c(E) ast(E) i2c_algo_bit(E) drm_shmem_helper(E) crct10dif_pclmul(E) drm_kms_helper(E) ahci(E) crc32_pclmul(E) nvme_tcp(E) libahci(E) nvme(E) crc32c_intel(E) nvme_fabrics(E) cdc_ether(E) nvme_core(E) usbnet(E) mlx5_core(E) ghash_clmulni_intel(E) drm(E) libata(E) ccp(E) mii(E) t10_pi(E) mlxfw(E) sp5100_tco(E) psample(E) pci_hyperv_intf(E) wmi(E) dm_multipath(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) be2iscsi(E) bnx2i(E) cnic(E) uio(E) cxgb4i(E) cxgb4(E) tls(E) libcxgbi(E) libcxgb(E) qla4xxx(E) [ 547.862283] iscsi_boot_sysfs(E) iscsi_tcp(E) libiscsi_tcp(E) libiscsi(E) scsi_transport_iscsi(E) fuse(E) [last unloaded: gsp_log(E)] [ 547.962691] CR2: 0000000000000020 [ 547.966003] ---[ end trace 0000000000000000 ]--- [ 549.012012] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1370499158 wd_nsec: 1370498904 [ 549.043676] pstore: backend (erst) writing error (-28) [ 549.050924] RIP: 0010:r535_gsp_msg_recv+0x87/0x230 [nvkm] [ 549.056389] Code: 00 8b 70 08 48 89 e1 31 d2 4c 89 f7 e8 12 f5 ff ff 48 89 c5 48 85 c0 0f 84 cf 00 00 00 48 81 fd 00 f0 ff ff 0f 87 c4 00 00 00 <8b> 55 10 41 8b 46 30 85 d2 0f 85 f6 00 00 00 83 f8 04 76 10 ba 05 [ 549.075138] RSP: 0018:ffffabe440f87e10 EFLAGS: 00010203 [ 549.080361] RAX: 0000000000000010 RBX: 0000000000000008 RCX: 000000000000003f [ 549.087484] RDX: 0000000000000000 RSI: ffffabe4480a8030 RDI: 0000000000000010 [ 549.094609] RBP: 0000000000000010 R08: 0000000000000000 R09: ffffabe440f87bb0 [ 549.101733] R10: ffffabe440f87dc8 R11: 0000000000000010 R12: 0000000000000000 [ 549.108857] R13: 0000000000000000 R14: ffff9351df1e5000 R15: 0000000000000000 [ 549.115982] FS: 0000000000000000(0000) GS:ffff93708eb00000(0000) knlGS:0000000000000000 [ 549.124061] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.129807] CR2: 0000000000000020 CR3: 00000003cc220002 CR4: 0000000000770ef0 [ 549.136940] PKRU: 55555554 [ 549.139653] Kernel panic - not syncing: Fatal exception [ 549.145054] Kernel Offset: 0x18c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 549.165074] ---[ end Kernel panic - not syncing: Fatal exception ]--- Also, nvkm wrongly advances the read pointer when handling a two-page GSP message in the rollback case. In the rollback case, the GSP message will be copied in two rounds. When handling a two-page GSP message, nvkm first copies amount of (GSP_PAGE_SIZE - header) data into the buffer, then advances the read pointer by the result of DIV_ROUND_UP(size, GSP_PAGE_SIZE). Thus, the read pointer is advanced by 1. Next, nvkm copies the amount of (total size - (GSP_PAGE_SIZE - header)) data into the buffer. The left amount of the data will be always larger than one page since the message header is not taken into account in the first copy. Thus, the read pointer is advanced by DIV_ROUND_UP( size(larger than one page), GSP_PAGE_SIZE) = 2. In the end, the read pointer is wrongly advanced by 3 when handling a two-page GSP message in the rollback case. Fix the problems by taking the total size of the message into account when advancing the read pointer and calculate the read pointer in the end of the all copies for the rollback case. BTW: the two-page GSP message can be observed in the msgq when vGPU is enabled. Signed-off-by: Zhi Wang <zhiw@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241017071922.2518724-2-zhiw@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104091 [ Upstream commit 01ed662 ] r535_gsp_cmdq_push() waits for the available page in the GSP cmdq buffer when handling a large RPC request. When it sees at least one available page in the cmdq, it quits the waiting with the amount of free buffer pages in the queue. Unfortunately, it always takes the [write pointer, buf_size) as available buffer pages before rolling back and wrongly calculates the size of the data should be copied. Thus, it can overwrite the RPC request that GSP is currently reading, which causes GSP hang due to corrupted RPC request: [ 549.209389] ------------[ cut here ]------------ [ 549.214010] WARNING: CPU: 8 PID: 6314 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:116 r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.225678] Modules linked in: nvkm(E+) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) mlx5_ib(E) amd64_edac(E) edac_mce_amd(E) kvm_amd(E) ib_uverbs(E) kvm(E) ib_core(E) acpi_ipmi(E) ipmi_si(E) mxm_wmi(E) ipmi_devintf(E) rapl(E) i2c_piix4(E) wmi_bmof(E) joydev(E) ptdma(E) acpi_cpufreq(E) k10temp(E) pcspkr(E) ipmi_msghandler(E) xfs(E) libcrc32c(E) ast(E) i2c_algo_bit(E) crct10dif_pclmul(E) drm_shmem_helper(E) nvme_tcp(E) crc32_pclmul(E) ahci(E) drm_kms_helper(E) libahci(E) nvme_fabrics(E) crc32c_intel(E) nvme(E) cdc_ether(E) mlx5_core(E) nvme_core(E) usbnet(E) drm(E) libata(E) ccp(E) ghash_clmulni_intel(E) mii(E) t10_pi(E) mlxfw(E) sp5100_tco(E) psample(E) pci_hyperv_intf(E) wmi(E) dm_multipath(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) be2iscsi(E) bnx2i(E) cnic(E) uio(E) cxgb4i(E) cxgb4(E) tls(E) libcxgbi(E) libcxgb(E) qla4xxx(E) [ 549.225752] iscsi_boot_sysfs(E) iscsi_tcp(E) libiscsi_tcp(E) libiscsi(E) scsi_transport_iscsi(E) fuse(E) [last unloaded: gsp_log(E)] [ 549.326293] CPU: 8 PID: 6314 Comm: insmod Tainted: G E 6.9.0-rc6+ #1 [ 549.334039] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022 [ 549.341781] RIP: 0010:r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.347343] Code: 08 00 00 89 da c1 e2 0c 48 8d ac 11 00 10 00 00 48 8b 0c 24 48 85 c9 74 1f c1 e0 0c 4c 8d 6d 30 83 e8 30 89 01 e9 68 ff ff ff <0f> 0b 49 c7 c5 92 ff ff ff e9 5a ff ff ff ba ff ff ff ff be c0 0c [ 549.366090] RSP: 0018:ffffacbccaaeb7d0 EFLAGS: 00010246 [ 549.371315] RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000923e28 [ 549.378451] RDX: 0000000000000000 RSI: 0000000055555554 RDI: ffffacbccaaeb730 [ 549.385590] RBP: 0000000000000001 R08: ffff8bd14d235f70 R09: ffff8bd14d235f70 [ 549.392721] R10: 0000000000000002 R11: ffff8bd14d233864 R12: 0000000000000020 [ 549.399854] R13: ffffacbccaaeb818 R14: 0000000000000020 R15: ffff8bb298c67000 [ 549.406988] FS: 00007f5179244740(0000) GS:ffff8bd14d200000(0000) knlGS:0000000000000000 [ 549.415076] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.420829] CR2: 00007fa844000010 CR3: 00000001567dc005 CR4: 0000000000770ef0 [ 549.427963] PKRU: 55555554 [ 549.430672] Call Trace: [ 549.433126] <TASK> [ 549.435233] ? __warn+0x7f/0x130 [ 549.438473] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.443426] ? report_bug+0x18a/0x1a0 [ 549.447098] ? handle_bug+0x3c/0x70 [ 549.450589] ? exc_invalid_op+0x14/0x70 [ 549.454430] ? asm_exc_invalid_op+0x16/0x20 [ 549.458619] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.463565] r535_gsp_msg_recv+0x46/0x230 [nvkm] [ 549.468257] r535_gsp_rpc_push+0x106/0x160 [nvkm] [ 549.473033] r535_gsp_rpc_rm_ctrl_push+0x40/0x130 [nvkm] [ 549.478422] nvidia_grid_init_vgpu_types+0xbc/0xe0 [nvkm] [ 549.483899] nvidia_grid_init+0xb1/0xd0 [nvkm] [ 549.488420] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.493213] nvkm_device_pci_probe+0x305/0x420 [nvkm] [ 549.498338] local_pci_probe+0x46/0xa0 [ 549.502096] pci_call_probe+0x56/0x170 [ 549.505851] pci_device_probe+0x79/0xf0 [ 549.509690] ? driver_sysfs_add+0x59/0xc0 [ 549.513702] really_probe+0xd9/0x380 [ 549.517282] __driver_probe_device+0x78/0x150 [ 549.521640] driver_probe_device+0x1e/0x90 [ 549.525746] __driver_attach+0xd2/0x1c0 [ 549.529594] ? __pfx___driver_attach+0x10/0x10 [ 549.534045] bus_for_each_dev+0x78/0xd0 [ 549.537893] bus_add_driver+0x112/0x210 [ 549.541750] driver_register+0x5c/0x120 [ 549.545596] ? __pfx_nvkm_init+0x10/0x10 [nvkm] [ 549.550224] do_one_initcall+0x44/0x300 [ 549.554063] ? do_init_module+0x23/0x240 [ 549.557989] do_init_module+0x64/0x240 Calculate the available buffer page before rolling back based on the result from the waiting. Signed-off-by: Zhi Wang <zhiw@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241017071922.2518724-3-zhiw@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

…ex() BugLink: https://bugs.launchpad.net/bugs/2104091 [ Upstream commit 082d9e2 ] Somewhen between 6.10 and 6.11 the driver started to crash on my MacBookPro14,3. The property doesn't exist and 'tmp' remains uninitialized, so we pass a random pointer to devm_kstrdup(). The crash I am getting looks like this: BUG: unable to handle page fault for address: 00007f033c669379 PF: supervisor read access in kernel mode PF: error_code(0x0001) - permissions violation PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025 Oops: Oops: 0001 [#1] SMP PTI CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1 Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024 RIP: 0010:strlen+0x4/0x30 Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001 RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379 RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8 R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30 FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x149/0x4c0 ? raw_spin_rq_lock_nested+0xe/0x20 ? sched_balance_newidle+0x22b/0x3c0 ? update_load_avg+0x78/0x770 ? exc_page_fault+0x6f/0x150 ? asm_exc_page_fault+0x26/0x30 ? __pfx_pci_conf1_write+0x10/0x10 ? strlen+0x4/0x30 devm_kstrdup+0x25/0x70 brcmf_of_probe+0x273/0x350 [brcmfmac] Signed-off-by: Stefan Dösinger <stefan@codeweavers.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104091 commit a3a860b upstream. The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # v2.6.16+ Fixes: 55a82ab ("[PATCH] tpm: add bios measurement log") Reported-by: Andy Liang <andy.liang@hpe.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495 Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andy Liang <andy.liang@hpe.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104091 commit b0fce54 upstream. syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com Reported-by: Jiacheng Xu <stitch@zju.edu.cn> Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/ Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104873 [ Upstream commit 5805402 ] vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline] Fixes: f9c4bb0 ("vxlan: vni filtering support on collect metadata device") Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

…faces BugLink: https://bugs.launchpad.net/bugs/2104873 commit 2240fed upstream. Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104873 [ Upstream commit 02458fb ] commit c8347f9 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198 [ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890 [ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28 [ 41.931289] ---[ end trace 0000000000000000 ]--- Inside the probe function when pm_runtime_enable() is called, the PM core invokes a resume callback if the device Host1x is in a suspended state. As it can be seen in the logs above, this leads to host1x_intr_start() function call which is trying to acquire a mutex lock. But, the function host_intr_init() only gets called after the pm_runtime_enable() where mutex is initialised leading to the use of mutex prior to its initialisation. Fix this by moving the mutex initialisation prior to the runtime PM enablement function pm_runtime_enable() in probe. Fixes: c8347f9 ("gpu: host1x: Fix boot regression for Tegra") Signed-off-by: Rupinderjit Singh <rusingh@redhat.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/ Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2104210 commit b583ef8 upstream. Max Makarov reported kernel panic [1] in perf user callchain code. The reason for that is the race between uprobe_free_utask and bpf profiler code doing the perf user stack unwind and is triggered within uprobe_free_utask function: - after current->utask is freed and - before current->utask is set to NULL general protection fault, probably for non-canonical address 0x9e759c37ee555c76: 0000 [#1] SMP PTI RIP: 0010:is_uprobe_at_func_entry+0x28/0x80 ... ? die_addr+0x36/0x90 ? exc_general_protection+0x217/0x420 ? asm_exc_general_protection+0x26/0x30 ? is_uprobe_at_func_entry+0x28/0x80 perf_callchain_user+0x20a/0x360 get_perf_callchain+0x147/0x1d0 bpf_get_stackid+0x60/0x90 bpf_prog_9aac297fb833e2f5_do_perf_event+0x434/0x53b ? __smp_call_single_queue+0xad/0x120 bpf_overflow_handler+0x75/0x110 ... asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:__kmem_cache_free+0x1cb/0x350 ... ? uprobe_free_utask+0x62/0x80 ? acct_collect+0x4c/0x220 uprobe_free_utask+0x62/0x80 mm_release+0x12/0xb0 do_exit+0x26b/0xaa0 __x64_sys_exit+0x1b/0x20 do_syscall_64+0x5a/0x80 It can be easily reproduced by running following commands in separate terminals: # while :; do bpftrace -e 'uprobe:/bin/ls:_start { printf("hit\n"); }' -c ls; done # bpftrace -e 'profile:hz:100000 { @[ustack()] = count(); }' Fixing this by making sure current->utask pointer is set to NULL before we start to release the utask object. [1] grafana/pyroscope#3673 Fixes: cfa7f3d ("perf,x86: avoid missing caller address in stack traces captured in uprobe") Reported-by: Max Makarov <maxpain@linux.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20250109141440.2692173-1-jolsa@kernel.org [Christian Simon: Rebased for 6.12.y, due to mainline change https://lore.kernel.org/all/20240929144239.GA9475@redhat.com/] Signed-off-by: Christian Simon <simon@swine.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry-picked from commit eff00c5e29abfc919a0647cb85c5ac6a5d6e1f0a linux-6.6.y) Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Acked-by: Massimiliano Pellizzer <massimiliano.pellizzer@canonical.com> Acked-by: Kuba Pawlak <kuba.pawlak@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106494 [ Upstream commit 071ed42 ] tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] Fixes: 80cd22c ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <pierre@stackhpc.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106494 [ Upstream commit 4ccacf8 ] Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106494 commit 07b598c upstream. Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106703 commit dd1998e upstream. The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds.. Fixes: 56a1485 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250220040029.27596-2-kfting@nuvoton.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

…umers BugLink: https://bugs.launchpad.net/bugs/2106703 [ Upstream commit b665353 ] While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. Fixes: 0c4dcd6 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106703 commit b150654 upstream. Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts locally") moved the call to enable_drhd_fault_handling() to a code path that does not hold any lock while traversing the drhd list. Fix it by ensuring the dmar_global_lock lock is held when traversing the drhd list. Without this fix, the following warning is triggered: ============================= WARNING: suspicious RCU usage 6.14.0-rc3 #55 Not tainted ----------------------------- drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by cpuhp/1/23: #0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 #1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 stack backtrace: CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55 Call Trace: <TASK> dump_stack_lvl+0xb7/0xd0 lockdep_rcu_suspicious+0x159/0x1f0 ? __pfx_enable_drhd_fault_handling+0x10/0x10 enable_drhd_fault_handling+0x151/0x180 cpuhp_invoke_callback+0x1df/0x990 cpuhp_thread_fun+0x1ea/0x2c0 smpboot_thread_fn+0x1f5/0x2e0 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x12a/0x2d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4a/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat about a possible deadlock between dmar_global_lock and cpu_hotplug_lock. This is avoided by not holding dmar_global_lock when calling iommu_device_register(), which initiates the device probe process. Fixes: d74169c ("iommu/vt-d: Allocate DMAR fault interrupts locally") Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com> Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/ Tested-by: Breno Leitao <leitao@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106703 commit 7fb3988 upstream. In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ... Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: fb09876 ("dm-integrity: introduce the Inline mode") Cc: stable@vger.kernel.org # 6.11+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit 9860370 ] irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ #69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ #69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250110163354.2012654-1-sean.anderson@linux.dev Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> CVE-2025-21684 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit b0fce54 upstream. syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com Reported-by: Jiacheng Xu <stitch@zju.edu.cn> Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/ Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

…faces BugLink: https://bugs.launchpad.net/bugs/2106026 commit 2240fed upstream. Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CVE-2025-21776 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit c79a39d upstream. On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1 Fixes: d953e0e ("pps: Fix a use-after free bug when unregistering a source.") Cc: stable@vger.kernel.org Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CVE-2024-57979 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit a3a860b ] The following failure was reported on HPE ProLiant D320: [ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0) [ 10.848132][ T1] ------------[ cut here ]------------ [ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330 [ 10.862827][ T1] Modules linked in: [ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375 [ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024 [ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330 [ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1 [ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246 [ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000 [ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0 The above transcript shows that ACPI pointed a 16 MiB buffer for the log events because RSI maps to the 'order' parameter of __alloc_pages_noprof(). Address the bug by moving from devm_kmalloc() to devm_add_action() and kvmalloc() and devm_add_action(). Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # v2.6.16+ Fixes: 55a82ab ("[PATCH] tpm: add bios measurement log") Reported-by: Andy Liang <andy.liang@hpe.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495 Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andy Liang <andy.liang@hpe.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> CVE-2024-58005 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit 4ccacf8 ] Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> CVE-2025-21865 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit 07b598c upstream. Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CVE-2025-21862 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit dd1998e upstream. The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds.. Fixes: 56a1485 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250220040029.27596-2-kfting@nuvoton.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CVE-2025-21878 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit f02c41f upstream. Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 [ Upstream commit 64e6a75 ] syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

BugLink: https://bugs.launchpad.net/bugs/2106026 commit f0577b1 upstream. If mappings points to an invalid memory, we will be invalid accessing it. Solve it by initializing the value of the variable mapping and by changing the order in the conditional statement (to avoid accessing mapping->id if not needed). Fix: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN NOPTI Fixes: 6350d6a ("media: uvcvideo: Set error_idx during ctrl_commit errors") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[BUG] Sources list on ubuntu focal #1

[BUG] Sources list on ubuntu focal #1

emidev98 commented Mar 26, 2022

[BUG] Sources list on ubuntu focal #1

[BUG] Sources list on ubuntu focal #1

Comments

emidev98 commented Mar 26, 2022